When taking your car for a road worthy inspection, the last thing you want to worry about is having to pay extra for costly repairs and another inspection. For this reason, it is important to check important features of your vehicle. Continue reading below for eight tips on what to check.

1.Check the Tires

Tires have to be in a safe condition to pass a road worthy inspection. Look for the wear indicators on each tire to determine if the tread is above the indicator. If it is below, it is probably time to invest in new tires for your safety and for your roadworthy certification. Make sure to check for wear even in the places that are difficult to see to ensure you are ready.

2.Check the Wipers

Wipers have to be in proper standing in order to pass a road worthy inspection. Effective wipers should remove all water and prevent scratching to the windshield. There should be enough padding on them to perform their jobs without major squeaking or noise. This will ensure your ultimate visibility when driving in rain or other dangerous weather conditions. Be sure to replace your wipers before your inspection if needed.

3.Check the Suspension

Though it is difficult to look at your suspension and know whether it is worn or not unless you are an expert, you can know if your suspension is starting to wear. If you hear loud knocking sounds when driving, this probably means the rubber brushes of your suspension are worn. If they are, then it is important to replace them for safe driving before your inspection date.

4. Look for the AirBag or ABS Light

Though there are some dashboard lights that do not matter during inspection, the appearance of the airbag or ABS lights indicate problems that you will run into during inspection. Have someone scan the codes to know exactly what is causing the problems. Disconnect the battery for a few minutes to try to disconnect the codes as well to determine there is not simply a computer failure.

5. Check the Lights and Horn

For your safety, a road worthy inspection will inspect all exterior lights on your vehicle, as well as the horn. Lights assist with visibility in harsh conditions while the horn can prevent accidents. Use a family member or friend to assist you by having them turn on all of the different lights while you ensure they come on. Listen for the horn when it is pressed as well.

6. Test the Hand Brake

The hand brake keeps your vehicle safe when it is sitting on an incline. It prevents it from rolling back or forward and hitting other vehicles or pedestrians. For this reason, check your hand brake by parking on a steep incline. Pull it on when parked to ensure your vehicle does not begin to roll. If it does, it may need replacement to keep your car safe.

7.Inspect the Seatbelts

Seatbelts are one of the most important safety features in your vehicle, especially during times of sudden braking or accidents. Seatbelts should lock and should be able to retract and adjust as needed. There should not be frays either that would lead to breakage of your seatbelts. It is important to replace any seat belts for buckles that are not locking or that are fraying as if they are about to break.

8.Check the Exhaust

Unless you are an expert, the exhaust system is difficult to find damages just by looking with your eyes. It is fairly easy to tell if there are damages by listening, however. A hole or some damage to the exhaust system will produce loud sounds, especially if the damage is significant. It is important to repair an exhaust system as soon as possible as a damaged one could release harmful fumes into the interior of your vehicle.

Final Thoughts

After you have followed all the tips above and fixed what needs to be fixed, it is time to go for your road worthy inspection. Consider ASAP Roadworthys Brisbane for your next inspection. They will provide a fair judgement and ample information on any repairs that should be made.